manualshive.com logo in svg

Black Box FX160A, User Manual

Share
Download
Black Box FX160A User Manual Download Page 48

PHONE LINE MANAGER 16 X 4

49

15.1  Clear Speed-Dialing and Call-Barring Tables

This command will erase all of the values in the global Speed-Dialing table and all of the values in the Call-
Barring (Toll-Restriction) tables. The speed-dialing numbers assigned to individual extensions are not
affected. This command also resets the individual extension Call-Barring passwords to their default value
(“111111”). (See the User’s Guide for more information about individual call barring.)

1. In the programming mode, enter 

7875

. Pause for the confirmation tone. Hang up or continue

programming.

15.2  Dial-Tone Detection

Specially equipped versions of the Phone Line Manager 16 x 4 can be programmed to detect that a dial tone
is present from the Central Office before a speed dial or redial operation will start sending the digits to the
Central Office. When this command is disabled (default condition), the Phone Line Manager 16 x 4 will
wait the amount of time set in the “Speed Dialing Delay Time” parameter before dialing the digits (see

Section 19.14)

.

Dial-Tone Detection will only operate on Phone Line Manager 16 x 4 units which contain the optional

dial-tone detection hardware.

To enable Dial-Tone Detection for Speed Dialing and Redialing:

1. At the System Manager’s extension, lift the handset and enter 

7840.

Pause for confirmation tone. 

To disable Dial-Tone Detection and use the Speed-Dial Delay Time:

1. At the System Manager’s extension, lift the handset and enter 

7841

. Pause for confirmation tone. 

Summary of Contents for FX160A


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands