22
LINESHARE MASTER
Upon entering the programming
mode, you will hear a busy tone or a
repeating message from the
intercept operator. Ignore the
activity on the phone line and
continue with your changes. If the
phone company resets your line and
you receive a busy tone, re-enter * #,
or hang up the phone for 10
seconds, re-enter programming, and
continue with your changes. If a
reset occurs in the middle of a
command (before receiving
confirmation tones), re-enter that
command only. Any previous entries
have been saved.
After completing your changes,
press the # key. The Lineshare
Master will produce three quick
beeps and exit the programming
mode.
If you adjust any of the timing
registers, be sure to properly
calculate the amount of time before
the Lineshare Master drops the line
(about five seconds before the
calling device connects to it). See
Chapter 6
for more information.
Table 5-1. The Lineshare Master’s Custom Functions.
Function
Function
Factory Setting
Options Available
Number
1
Tone Time
0.5
0.1 - 9.9
2
Silence Time
1.5
0.5 - 9.9
3
Time Before First Tone
1.5
0.5 - 9.9
4
Number of Tones to Send 10
01 - 99
6
Call Hold Function
1
1=ON
0=OFF
9 9 9
Reset to Factory Settings
*
Exit programming mode
