Copyright
2006 Ringdale User Manual, 62-15820000 Page 20
20
20
20 of
of
of
of 49
49
49
49
TELNET
Once you have configured the initial IP address or set your PC to the same network
as the FaxReceiver, you can use Telnet to configure the parameters.
B E N E F I T S O F U S I N G T E L N E T :
1) You can use HyperTerminal or any other telnet utility to perform the setup
procedures.
2) The FaxReceiver does not have to be on the same physical network as long as you
have a virtual connection to the network that it is attached to.
3) There are additional debug features available in Telnet that are not available in
the NPMP client.
This guide covers using the telnet utility that comes with Windows.
a.
Click on the Windows
button in the lower left, and select
Run…
b.
Type in
CMD
and press the
Enter
key. This will take you to the command
prompt shown below.
