Installation
Press the power cable and video cable into the grove between the
windshield and the upholstery of the vehicle. You may use the mounts to
arrange the cable if needed.
6
This product have an ability that can rotate 360 degrees. Thus, if you want to
use for indoor image black box, rotate unit to the opposite side of front. When
rotate the unit, please check cable connectivity carefully.
Installation (Passenger Car, SUV, Larger SUV)
After proper vehicle type is selected and the camera is adjusted, you should drive the car on a road now and find a
road section with proper lane markings as soon as possible.
The system will not start correct operation, before
You have passed at least 1 x such a road section for at least 30 seconds
with a speed slightly higher than the
adjusted minimum speed warning level. Later, the image recognition software inside the camera will automatically
repeat the adjustments regularly and is even able to adjust the system temporarily to different lane marking
systems used in construction areas.
After the system has made all internal adjustments and calibrations,
You will hear an announcement, that the warning system is now working properly.
Important note: Never
press the
automobile type selection button
during driving-
because pressing this knob
automatically will erase the old camera calibration and starts a new calibration procedure. If this should happen
accidentally, You can restore the old setting by
waiting the 2 beeps
, which start the tilt adjustment time and
press
1 x the same knob
again. This will restore the previous calibration again and the system will work again after
short time.
7
Summary of Contents for FAS 200 / MFA
Page 1: ...FAS 200 MFA Users Manual...