724-746-5500 | blackbox.com
Page 32
Chapter 4: Operation
4.3 Factory Default Settings on Transmitters and Receivers
To restore the transmitters and receivers to the default settings, follow these steps.
4.3.1 Factory Default Setting on the Transmitter
STEP 1:
Press and hold the “EDID Copy” button.
STEP 2:
Apply power to the transmitter.
STEP 3:
Release the button RIGHT AFTER two LEDs flash.
NOTE: A two-beep sound is used to confirm power supply.
STEP 4:
Power cycle the unit.
4.3.2 Factory Default Setting on the Receiver
STEP 1:
Press and hold the “+” button.
STEP 2:
Apply power to the receiver.
STEP 3:
Release the button RIGHT AFTER two LEDs flash.
NOTE: A two-beep sound is used to confirm power supply.
STEP 4:
Power cycle the unit.