724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 19
Chapter 4: Operation
4.3 Embedded EDID Modes
Table 4-3. EDID function for HDMI matrix switch: select embedded EDID mode or LEARNING mode.
Embedded EDID modes
Total 8 EDID modes
Embedded EDID setup
Press EDID > SOURCE > ENTER
Select Embedded EDID mode or LEARNING mode.
1. Press the EDID button. The LCM will show the currently selected EDID mode.
2. Repeatedly pressing the Source 1 button will cycle UP through the options. Repeatedly pressing the Source 2 button will
cycle DOWN through the options.
3. Select Embedded EDID:
Mode 1: FSS
Mode 5: H36-3D-M
Mode 2: H24-3D
Mode 6: DVI-D 1280 x 1024—60 HZ
Mode 3: H24-3D-M
Mode 7: DVI-D 1920 x 1200—60 HZ
Mode 4: H36-3D
Mode 8: AUTO
4.4 LEARNING EDID
Table 4-4. LEARNING EDID function for HDMI matrix switch.
LEARNING EDID
Learning EDID form Destination to Source
LEARNING EDID setup:
Press EDID > DESTINATION > SOURCE > ENTER
Press EDID > DESTINATION button: The LCM will show LEARNING.
The switch will learn the destination EDID and pass the selected source.
NOTE: The already learned EDID cannot be modified. You can only rebuild a new
Learning EDID.
For example, when the Source has “Learned” the EDID data from a Destination, it
will save that EDID information into EPROM and the EDID data cannot change.
To remove the learning EDID memory from EPROM, select new learning destination
to sources or change one of the embedded EDID modes.
