724-746-5500 | blackbox.com
Page 21
Chapter 5: Operation
Figure 5-9. Firmware update screen.
Follow these steps to update the firmware:
STEP A: Unplug the Mini-USB connector from the device.
STEP B: Set the DIP switch to ON (UP).
STEP C: Connect the device to the PC via a USB to mini-USB cable.
STEP D: Click the FW Update button in the software.
STEP E: Click on the “Load File” button to select the firmware file.
STEP F: Click on the “Burn” button to start the firmware update process.
STEP G: Unplug the Mini-USB connector from the device.
STEP H: Set the DIP switch to OFF (DOWN).
The firmware update process is complete.
7. I/O Port and Resolution Info
Displays the information about the I/O Port and the applied resolution.
8. Refresh Button
Refreshes the status of the converter.
9. Output Quick Selection Button
Controls common functions for quick setting.
