Page 25
724-746-5500 | blackbox.com
Chapter 4: Operation
1. Standby button: Press this button to enter/exit
standby mode.
2. Input channel selection buttons: INPUT 1 is for
HDMI1, INPUT 2 for HDMI2…INPUT 5 for VGA2.
AUTO: Enable/disable auto-switching mode.
3. Volume adjustment buttons:
MIC-/+: turn down/up MIC volume
LINE-/+: turn down/up line volume
MIC MUTE: mute/unmute MIC audio
LINE MUTE: mute/unmute line audio
4. Menu operation buttons:
MENU: press to enter the OSD menu or return to
the previous menu;
EXIT: exit OSD menu.
OK: confirm button;
Navigation buttons: UP/DOWN/LEFT/ RIGHT button,
to set values or go to the next page,
You can also use buttons in area
a
in CEC mode to
enter the menu for an HDMI source device; P.P,
ZOOM, S.M: shortcut button, to select display
mode.
5. Resolution selection buttons:
To select resolution, press the corresponding
button.
AUTO: Enable/disable auto-switching mode.
6. CEC function buttons:
For HDMI input signal, which supports CEC only,
Including PLAY, PAUSE, STOP, MENU, REV (reverse)
and FWD (forward).
a. Buttons in section
a
also work when entered in CEC
mode.
Figure 4-2. Remote control.