®
To connect the link cable(s)
The links between the transmitter and receiver modules are made using between
one and eight twisted pair cables, specified to Category 5 or higher. Each cable
carries video, audio and serial communication signals to each receiver module.
When a single receiver is attached to a link cable, the maximum length of that
link cable is 300m (1000 feet).
AVU6004A & AVU6008A models
1 Attach the connector of the first link cable to the socket labelled
LINK1
on
the AVU6004A/AVU6008A transmitter. There should be a click when the
cable is fully inserted and locked in place.
2 Attach the connectors of the remaining link cables to the sockets labelled
LINK 2
to
LINK 4
, (
LINK 2
to
LINK 8
on AVU6008A), as required.
In all cases, there should be a click when the cable is fully inserted and
locked in place.
®
724
-74
6-55
00
®
IN
OU
T
IN
OU
T
LINK
POW
ER
TRA
NSM
ITT
ER
Wiza
rd
Multi
media
Exte
nder
Plus
Overall maximum link length: 300m
STANDARD LINK
TRANSMITTER
RECEIVER
Note: Long cable lengths may induce colour separation effects. AVU6111A
receivers contain the necessary circuitry to minimise such effects.
However, if further transmitters are connected in cascade to the initial
transmitter, then the overall length of the link cables used must be reduced. For
further information, please refer to the section
Making.cascade.connections
.
AVU6001A models
1 Attach the connector of the link cable to the
socket labelled
LINK
on the AVU6001A
transmitter. There should be a click
when the cable is fully inserted
and locked in place.
LINK
5
LINK
6
LINK
7
LINK
8
LINK
1
POW
ER
LINK
2
LINK
3
LINK
4
Important
Category 5, 5e or 6 (CATx) cabling is used to form the links between
transmitters and receivers. However, the signals used are
not
Ethernet or
IP-related and must never be connected via network switches or to any other
networking equipment.
Where possible, avoid laying the CATx twisted pair link cable(s) alongside power
cables.
Wizard MultiMedia
Plus
transmitters and receivers must not be connected,
via a CATx link, to Wizard MultiMedia AVU5001A, AVU5011A or AVU5004A
modules.
Connecting the CATx link cable
to the AVU600A transmitter
Connecting the CATx link cable
to the AVU6004A or AVU6008A
transmitter
