ServSwitch DKM FX DVI/VGA Card
4
Caution!!! Before entering a new command, check your keyboard CAPS LOCK/SCROLL LOCK to make sure
they are not flashing. If they are flashing, you will need to press ESC, or L-Shift+ESC to clear the command
mode. Once cleared and the LEDs are no longer flashing, you can enter the next command.
Hotkeys:
Enter OSD
<
HOTKEY
>, <V>, <Enter>
Exit Command Mode
<L-Shift> + <Esc>
Exit OSD
<Esc>
Navigation in menu
Up, Down Arrows
Menu Selection
<Enter>
Leave Sub Menu
<Backspace>
Change of settings in sub menu
Left, Right Arrows
Direct Commands:
Automatically select active input (VGA/RBG/EGA)
<
HOTKEY
>, <V>, <A>
Direct Selection of VGA
<
HOTKEY
>, <V>, <F1>
Direct Selection of DVI-D
<
HOTKEY
>, <V>, <F2>
