![Black Box ACX1MR Series User Manual Download Page 81](http://html.mh-extra.com/html/black-box/acx1mr-series/acx1mr-series_user-manual_2761222081.webp)
724-746-5500 | blackbox.com
Page 81
Chapter 4: Configuration
Table 4-5 (continued). Parameters for CPU units.
Digital Audio (continued)
Parameter
Function
SRC44100
Activate sample rate conversion, sample rate 44,1 kHz (only with digital audio upgrade module)
SRC48000
Activate sample rate conversion, sample rate 48 kHz (only with digital audio upgrade module)
SRC96000
Activate sample rate conversion, sample rate 96 kHz (only with digital audio upgrade module)
SRC_NONE
Deactivate sample rate conversion (only with digital audio upgrade module)
Compression
Parameter
Function
MEDCPRATE
Activate medium compression rate
MINCPRATE
Activate low compression rate
MAXCPRATE
Activate high compression rate
Shared Operation
Parameter
Function
KBDCON
Activate Keyboard Connect (only with redundant CPU Units)
MOUCON
Activate Mouse Connect (only with redundant CPU Units)
RELEASETIME=n
Release timer n = 0...9 seconds for Mouse and Keyboard Connect, without parameter = 10 seconds
General Settings
Parameter
Function
DISPLAY2
Show video channel 2 per default after switching on the respective Dual-Head unit
4.5.2 Parameters for CON Units
You can write the following parameters into the configuration file of a CON Unit.
Table 4-6. Parameters for CON units.
Output Settings
Parameter
Function
1080p50Hz
Always display 50 Hz when using 1920 x 1080
DISEXTOSD
Deactivate extender OSD
ENAFRAME
Show orange colored frame when losing extender connection
ENAHOLDPIC
Show last transmitted picture highlighted by an orange colored frame when losing connection
ENADDCTX
Activate DDC transmission by unplugging and connecting the monitor back to the CON Unit
CENTERMODE
Simulate the native resolution of Dual-Link monitors by an additional black frame in order to enable
Instant Switching (Dual-Link models only).
PARAM=V
Simultaneous output of DVI-D and VGA signal (DVI-I module only)