Page 41
877-877-2269 | blackbox.com
ACX1T
Chapter 3: Installation
4. Connect the 5-VDC power supply to the CON Unit.
CPU Unit Installation
5. Connect the source (computer, CPU) with the supplied cables to the CPU Unit. Make sure the cables are not strained.
6. Connect the CPU Unit to the interconnect cable(s).
7. Connect the 5-VDC power supply to the CPU Unit.
8. Power up the system.
NOTE: To power up the system, the following sequence is recommended: Monitor – CON Unit – CPU Unit – source.
NOTE: The KVM extender with VGA / DVI-I input is connected as mentioned above. For a complete and detailed description of
the setup and configuration of the VGA option, see the
Media/DVI Converter [part number ACS411A-R2]) manual.
3.2.2 Setup of Optional Modules
You can hot-plug the modules.
Analog Audio/Serial Option:
1. Connect the audio source with the CPU Unit (for example, CPU audio output with audio input, CPU audio input with audio
output).
2. Connect the audio output at the CON Unit with headphones or suitable speakers.
3. Connect the audio input at the CON Unit with a suitable microphone.
Digital Audio Option:
1. Connect the digital audio source with the suitable audio input of the CPU unit.
2. Connect the audio output of the CON Unit with suitable speakers or audio amplifiers.
NOTE: If several active sources are connected, Mini-XLR input takes priority.
The audio signal is available at all outputs.
USB-HID Add-On Option:
1. Connect the CPU with the CPU Unit (USB-HID 2).
2. Connect the USB-HID devices with the CON Unit (Connect to USB-HID device 2).
USB 2.0 Add-On Option:
1. Connect the CPU with the CPU Unit (USB 2.0).
2. Connect the USB 2.0 devices with the CON Unit (Connect to USB 2.0 devices).
