Chapter 3: Installation
724-746-5500 | blackbox.com
Page 11
Figure 3-4. Attaching the USB link cable
3.2.1.2 USB connection
1 Use the supplied USB cable to link the USB socket of the local module to a vacant USB socket on the computer as shown in
Figure 3-4:
3.2.1.3 Link connection
1 Connect the link cable (see page 2 for cable advice) to the local module socket labeled
TO REMOTE
as shown in Figure 3-5:
Figure 3-5. Attaching the CATx link cable
IMPORTANT:
• This is NOT an Ethernet port and must not be connected to network switches
or any device other than the remote module.
• These extenders are NOT compatible with the standard DVI/USB SRX (single
link) versions. Where both types are being used in close proximity, take care
not to cross connect the local and remote modules between the two versions.
