724-746-5500 | blackbox.com
Page 6
DVI Extender
1. Specifications
Compatible Cable:
50-/125-µm multimode fiber, OM3 preferred;
Link distance using 50-/125-µm multimode fiber is up to 1280 ft. (400 m);
Link distance using 62.5-/125-µm fiber is reduced to 576 ft. (180 m)
Emulation Mode:
Supports extended EDIDs up to 256 bytes
Housing:
Metal, black powder-coated
Link Distance:
Up to 1280 ft. (400 m)
Mounting Holes:
(2) on bottom plate
Optical Wavelength:
6 ch. CWDM 725–925 nm
Output Laser Class:
TX unit: 1M; RX unit: 1
Pixel Rates:
Supports DVI 1.0 single-link signals with pixel rates from 25 MHz
to 165 MHz
Transparency Mode:
EDID, including HDCP
®
support on most sources
User Controls:
TX unit: (1) push button for EDID mode select
Interface:
(1) TX; (1) RX
Connectors:
TX interface: (1) DVI-D (24 + 1 pin), (1) HDMI (via optional
adapter), (1) SC, (1) 2.1/5.5-mm barrel connector for power;
RX interface: (1) DVI-D (24 + 1 pin), (1) HDMI (via optional
adapter), (1) SC, (1) 2.1/5.5-mm barrel connector for power
Indicators:
TX interface: (1) multicolor LED shows signal presence and mode:
Blue: Transparent; Green: EDID; Red flashing: EDID read incorrect;
Green flashing: EDID read OK;
RX interface: (1) multicolor LED shows link quality and operation mode:
Green: Link OK; Red flashing: No link
Power:
(2) wall adapters*: Input: 120 VAC, 60 Hz or 230 VAC, 50 Hz;
Output: 5 VDC, 0.5 A, 2.5 W on barrel connector, 2.1/5.5 mm positive
on inner contact
* Local unit usually does not require a power supply since it draws power from
the DVI interface.
Size:
1.5"H x 2.2"W x 2.2"D (2 x 5.5 x 5.5 cm)
Weight:
Each unit: 0.19 lb. (85 g)
