APPENDIX: Troubleshooting
Appendix. Troubleshooting
A.1 Problems/Solutions
Problem:
No VGA signals are received at the remote unit.
Solution:
Make sure that both the local and remote units are powered on. The
Active LED will light on both units to indicate that the signal is correct.
Problem:
The VGA signal is garbled.
Solution:
Make sure that the wires inside the cable conform to the straight-pinned
EIA/TIA 568A or 568B standard.
Problem:
The Active LED on the remote unit is always off.
Solution:
The Active LED on the local unit must be on. Check the CAT5, 5e, or 6
cable wiring. Make sure that the Power LED on the remote unit is on.
Problem:
The VGA quality changes when you change cables.
Solution:
Use the equalizer selector switch to adjust the VGA signal for various
cable lengths and characteristics.
Problem:
There’s no audio signal at the remote unit.
Solution:
Make sure that the volume is high enough.
16
Summary of Contents for AC555A-4-R2
Page 2: ......
