5
S-VIDEO BREAKOUT BNC OR RCA
3. Installation
NOTE
You must use two S-Video Breakouts to complete
installation (one at the S-Video source and one a
S-Video termination).
1. Connect your S-Video source’s output (VCR,
camcorder, distribution amplifier, etc.) to the
Breakout’s 4-pin female mini-DIN input.
2. Connect one coaxial cable to each output (the
connector type is determined by the breakout you
have). It is helpful to mark the cables as “Y” and
“C” respectively.
3. At the terminating end of the cable run, connect
the “Y” cable to the “Y” input connector and the
“C” cable to the “C” input connector.
4. Finally, connect an S-Video cable to the 4-pin
female mini-DIN.
