21
STATION EXTENDERS
3.4 ServSwitch to ServSwitch
This installation requires the parts shown in the
table below. The LINK cable is also required for
installation and is purchased separately. Connect
the parts together as shown in
Figure 3-4
.
The units are most often sold as kits. Kit part number
AC256A contains 2 pieces of item 1.
ITEM PART NUMBER
DESCRIPTION
1
AC252A (two required)
Station Extender used on switch side.
2
EHN250-xxxx, where xxxx is
Link cable to interconnect AC252A
the length of cable in feet
and AC252A.
