Model AC1031A-2 and AC1031-4
8
cable as it cannot plug in to your PC’s output and you need to
purchase a DVI-D cable that does not have the extra analog pins.
The DVI-D cable can plug to the Splitter, it just does not have the
extra analog pins Furthermore, it does not make any difference if
the cable is Single or Dual Link. The Splitter is a Single-Link unit
but you can physically plug either a Dual-Link or a Single Link
cable into it)
5. Plug the supplied power adapter to the unit (The green LED on the
front panel turns on)
6. Turn on the monitors.
7. Turn on the PC.
2.1 Cascade Operation
For more outputs you can connect output #1 of the Splitter to the input
of a Slave Splitter. It is recommended to keep cascading to only 2-
levels deep.
Figure 4.
Setup Block Diagram
