Black Box AC1030A, Manual

Page: 8 / 14

2-Channel Component Video Splitter/Switch
7
2. Installation
1. Your package includes the Splitter/Switch box, a power supply, 9
pieces of RCA-to-BNC adapters, and this Manual. No cables are
included with this device, if you need to purchase Component
cables for inputs and outputs please contact Black Box.
2. Prior to applying the power supply to the unit, decide if the
application calls for a Splitter (1 in x 2 out) or a Switch (2 in x 1
out) and set the mode of operation via the front panel switch. Once
power is applied, if the unit is acting as a splitter both LED’s on the
front panel (labeled A and B) will be on, and when acting as a
switch, only one LED (the selected port) will be lit.
Figure 3- Front Panel
3. Plug the input and output cables to the unit
4. Plug the power supply into the unit.
5. Turn on the monitor(s) and the video source.
Figure 4 – Rear Panel