12
CAT5 MULTI VGA SYSTEM
Figure 3-2. Receiver connections on the AC1001A.
3.3.3 C
ONNECTIONS ON THE
S
INGLE
-P
ORT
VGA/RS-232 (AC1004A–AC1005A)
The Single-Port CAT5 Multi VGA System with RS-232 (AC1004A–AC1005A)
supports video and full-modem serial (RS-232) signals over CAT5 cable. You can
also use the transmitters and receivers to make video-only connections without
serial communications.
Figure 3-3 shows the Single-Port CAT5 Multi VGA System with RS-232 Transmitter
connections, and Figure 3-4 shows the receiver connections.
NOTE
Even though both transmitter and receiver units contain audio jacks,
audio is not supported on the RS-232 version. Plugging in audio cables
will interfere with the RS-232 serial communications.
Figure 3-3. Transmitter connections on the AC1004A.
CAT5
UTP
Audio
Out
Power
Video
Out
CAT5
UTP
Serial
In/Out
Power
Video
Out
Video
In
