background image

10

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 3: INSTALLATION AND WIRING

1.  Using a quality DisplayPort cable, connect a DisplayPort source to the DP in connector on the Transmitter.
NOTE:  Make sure the source and display are 4K compatible if attempting to transmit an Ultra HD signal — check that all devices  

are correctly configured for input/output compatibility.

2.  Connect a good quality, well-terminated CAT5e/6/7 cable between the HDBT Out connector of the Transmitter to the HDBT In 

connector of the Receiver.

NOTE:  230 feet (70 meters) @ 4K or 328 feet (100 meters) @ 1080 p video are maximum recommended transmission distances  

for this model under perfect transmission conditions — including straight cable runs with no electrical interference, bends, 
kinks, patch panels or wall outlets. If any of the above factors are marginal in your installation, transmission range  
may be affected — be careful to avoid where possible.

3. Connect the DisplayPort display device (LED/LCD display or projector) to the DP Out connector of the Receiver.
NOTE:  We strongly recommended using the supplied mounting brackets to secure the receiver to a flat surface behind/near  

the display device. Sudden movement of these devices could lead to loss of picture/sound if connections become loose  
or strained, resulting in unnecessary service callbacks.

4.  Connect the included 12-V power supply to the Transmitter. The PoE function carries power along the length of the cable one-way 

to power the Receiver. No additional power supply is required at the display end of the cable run.

Check that the Power, Status, and HDCP and Link lights are illuminated on both units to indicate successful connection,  
with a lit HDCP light illustrating the presence of encryption within the signal. Power and Link are static lights. The Status LED  
should be blinking.

DC 12V

HDBT Out

RS232

DP In

Audio In Audio Out

USB Host

Tx Rx G

DC 12V

HDBT Out

RS232

DP Out

Audio In Audio Out

USB Device

Tx Rx G

Transmitter

Receiver

CATx cable

DisplayPort

Audio

USB

PC

DisplayPort

Audio

USB

Monitor

Earphone Keyboard/Mouse/Mic/USB Camera

FIGURE 3-1. SAMPLE INSTALLATION

Summary of Contents for 4KDPKVMXT-100M

















Reviews: