6
ENGLISH
(Original instructions)
Use
Switching on and off (Fig. A)
u
Push the On/off power switch (1) to the forward position to
turn on the unit.
u
Returning the On/off power (1) switch will turn the unit off.
Fitting the removable squeegee (Fig. B)
u
Insert the removable squeegee into the front of the
appliance. Make sure that the accessory is pushed fully in
Fitting the wall bracket (Fig. C)
u
Fit the wall bracket (4) to a suitable wall (preferably near a
power outlet) using the screws provided.
u
The unit can then be stored, when not in use, or during the
charging procedure, utilising the hanging attachment (6).
Charging (Fig. E)
u
Place the appliance onto the charging base (5).
u
Place the charging plug into a power outlet. The charger
LED will light and it will go out when charging is complete.
u
Press the dust chamber release button (2) as shown in
u
Seperate the dust chamber (3) from the motor unit as
u
Lift the pre filter assembly (8) out of the dust chamber (3).
-
u
Empty the dust bowl (3) by lightly shaking over a suitable
u
Rinse out the dust-bowl with warm soapy water.
u
J.
u
u
u
Replace the dust chamber onto the motor unit. Make sure
the release button (2) clicks into place.
Warning!
Before performing any maintenance or cleaning on
the appliance, unplug the appliance.
From time to time wipe the appliance with a damp cloth.
Do not use any abrasive or solvent-based cleaner. Do not
immerse the appliance in water
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
u
Run the battery down completely if it is integral and then
switch off.
u
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u
Regularly clean the ventilation slots in your appliance/
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
-
your BLACK+DECKER dealer.
u
u
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
Summary of Contents for WDA320B
Page 2: ...2 81mm 4 6 1 3 7 A B C E 2 F 5 ...
Page 3: ...3 10 3 G I J 3 8 10 H 3 ...
