Black & Decker VH801, User Manual

Page: 5 / 12

5
ENGLISH (Original instructions)
To clean the exhaust filter, proceed as follows
u
Remove the exhaust filter grill (part K) from the appliance.
u
Remove the filter (part J) from the appliance.
u
Wash and dry the filter as described above.
u
Refit the filter and replace the exhaust filter grill. Put the
grill to lock in position.
CAUTION! Never use the appliance without the filters.
Optimum dust collection will only be achieved with clean filters
and an empty dust bowl. If dust begins to fall back out of the
appliance after switching it off, this indicates that the dust bowl
is full and must be emptied.
Replacing the filters
The filters should be replaced every 6 to 9 months and
whenever worn or damaged. Replacement filters are available
from your dealer.
u
Remove the old filters as described above.
u
Fit the new filters as described above.
Storage
Store the appliance and the attachments in a dry location out
of the reach of children.
Cleaning/ Maintenance
Warning! Before cleaning and maintenance, switch the appli-
ance off and unplug it. From time to time wipe the appliance
with a damp cloth. Do not use any abrasive or solvent-based
cleaner. Never let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
Correct disposal of this product
This marking indicates that this product should
not be disposed with other household wastes.
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustain-
able reuse of material resources. To return your
used device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmental safe recycling.
Service Information
Black & Decker offers a full network of company-owned and
authorized service locations throughout Asia. All Black &
Decker Service Centers are staffed with trained personnel
to provide customers with efficient and reliable power tool
service.Whether you need technical advice, repair, or genuine
factory replacement parts, contact the Black & Decker location
nearest to you.
Assembly
Warning! Make sure that the appliance is switched off and
unplugged.
Attaching the accessories for vacuuming (fig. 2/
fig. 3/ fig. 4/ fig. 5/ fig. 6) )
The accessories provided can be used in various combina-
tions, depending on the task:
u
General vacuuming / dusting
u
Vacuuming in confined spaces.
u
Vacuuming upholstery or in corners.
To attach, insert the appropriate accessory into the front of the
appliance as shown.
Switching on andoff
u
To switch the tool on, set the on/off switch (C) to position I.
u
To switch the tool off, set the on/off switch (C) to position
O.
The usage of Straps (fig.5)
This machine is equipped with Straps for more convenience
use. The Straps hook clasps the machine directly, the user
can carry it during operation.
The usage of Blow nozzle (fig.6)
This machine is equipped with blow nozzle for more conveni-
ence use.
The use method:
Open the exhaust filter grill (part K), insert the hose to outlet,
then connect the hose with blow nozzle, and then start to use.
Cleaning the dust bowl and filter (fig. 7)
Warning! Make sure that the appliance is switched off and
unplugged.
When the dust bowl is full or the filters are clogged, empty the
bowl and clean the filters.
The filters are re-usable and should be cleaned regularly.
u
Press the dust bowl release button (part B) and remove
the dust bowl (part A).
u
To remove the filter.
u
Remove any dust from the dust bowl.
u
Wash the filters in warm, soapy water. The bowl can also
be washed if necessary. Do not immerse the appliance in
water.
u
Make sure the dust bowl and filter are completely dry.
u
Refit the filter to dust bowl.
u
Refit the dust bowl onto the appliance, making sure the
dust bowl clicks into place.