How to Use
This appliance is for household u
se only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a
home softening system.
Important:
For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
IRONING WITH STEAM
Filling Water Tank
1. Open the water-fill cover
(A)
.
2. Tilt the iron and using a clean measuring cup, pour water
into opening until the water reaches the MAX level mark
on the water tank
(B)
. Do not overfill.
3. Close the water-fill cover.
4. Plug in the iron. The temperature-ready light glows
(C)
.
Tip:
If unsure of a garment’s fiber, test a small area (on an
inside seam or hem) before ironing.
5. Move the dry/steam selector to the desired steam
level
(D)
.
6. Turn the fabric-select dial to appropriate steam setting
(between 4 and 6) for your fabric
(E)
. Read garment’s label
to help you determine fabric type.
• The temperature-ready light glows until it reaches the
appropriate temperature.
• It then glows on and off during ironing. This is normal.
7. When finished ironing, turn the fabric-select dial to lowest
heat setting, move the dry/steam selector to
and
unplug the iron.
4
3
Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill cover
3. Dry/steam selector
4. Spray button
5. Steam button
6. Temperature-ready and auto shutoff light
7. Comfort Grip™ handle
8. 360° pivoting cord
9. Heel rest
10. Fabric-select dial
11. AUTO CLEAN
®
button
12. Water tank
13. Soleplate
Steam
Spray
Dry
Symbols
A
B
C
D
E
AS255Pub1000003118 7/25/06 4:25 PM Page 4
