Black & Decker STC1840 Original Instructions Manual Download Page 7

6

ENGLISH

(Original instructions)

7

ENGLISH

(Original instructions)

u

 

Only use the appliance in the upright 

position, with the cutting line near the 

ground. Never switch the appliance on 

in any other position.

u

 

Move slowly when using the appliance. 

Be aware that freshly cut grass is 

damp and slippery.

u

 

Do not work on steep slopes. Work 

across the face of slopes, not up and 

down.

u

 

Never cross gravel paths or roads 

while the appliance is running.

u

 

Never touch the cutting line while the 

appliance is running.

u

 

Do not put the appliance down until the 

cutting line has come to a complete 

standstill.

u

 

Use only the appropriate type of cut

-

ting line. Never use metal cutting line 

or fishing line.

u

 

Be careful not to touch the line trim

-

ming blade.

u

 

Take care to keep the mains cable 

away from the cutting line. Always be 

aware of the position of the cable.

u

 

Keep hands and feet away from the 

cutting line at all times, especially 

when switching on the motor.

u

 

Before using the appliance and after 

any impact, check for signs of wear or 

damage and repair as necessary.

u

 

Never operate the appliance with 

damaged guards or without guards in 

place.

u

 

Take care against injury from any de

-

vice fitted for trimming the filament line 

length. After extending new cutter line 

always return the machine to its nor

-

mal operating position before switching 

on.

u

 

Always ensure that the ventilation slots 

are kept clear of debris.

u

 

Do not use the lawn trimmer (edge 

trimmer), if the cords are damaged or 

worn.

u

 

Keep extension cords away from cut

-

ting elements.

Additional safety instruc-

tions for batteries and charg-

ers

Batteries

u

 

Never attempt to open for any reason.

u

 

Do not expose the battery to water.

u

 

Do not store in locations where the 

temperature may exceed 40 °C.

u

 

Charge only at ambient temperatures 

between 10 °C and 40 °C.

u

 

Charge only using the charger pro

-

vided with the tool.

u

 

When disposing of batteries, follow 

the instructions given in the section 

"Protecting the environment".

Chargers

u

 

Use your BLACK+DECKER charger 

only to charge the battery in the tool 

with which it was supplied. Other bat

-

teries could burst, causing personal 

injury and damage.

Summary of Contents for STC1840













Reviews: