Black & Decker RC1050-B1, Manual

Page: 6 / 20

• Measure the rice with the measuring cup
(6).
Determining the required water quantity
The amount of water required can be
determined in the following table.
• Measure the water quantity with the
measuring cup (6) according to the table
below.
Cooking rice
Warning! Do not interfere with the
automatic action of the control lever by
preventing it from switching to the warm
mode.
Warning! Exercise caution when handling
the appliance as the cooking bowl and
accessories get hot during use. These may
remain hot for some time after use.
Warning! Steam can escape from the unit
when the accessories or lid is removed.
• Measure the rice.
• Wash the rice thoroughly under cold
running water to remove excess starch.
Important:
Do not use the cooking bowl to
wash the rice.
• Put the washed rice into the cooking
bowl (4).
• Add the required amount of water.
• Smooth the surface of the rice with the
rice spoon, ensuring all the rice is under
water.
• Put the cooking bowl into the appliance.
• Ensure the cooking bowl is correctly
fitted in good contact with the heating
plate.
• Fit the lid.
• Plug the supply cord into a suitable
electric supply. The keep warm indicator
(3) will light up.
• Press the control lever (1) to start the
cooking process. The cook indicator (2)
will light up.
The cook indicator will go out when the
cooking process is finished. After that the
keep-warm indicator (3) will light up
automatically.
Note:
For the best results stir the rice just
after the keep-warm indicator comes on.
Stirring the rice with the rice spoon allows
the steam to escape. This will give fluffier
rice.
Rice quantity Water quantity
1 cups 2 cups
2 cups 3 cups
3 cups 3.5 cups
Rice quantity Water quantity
1 cups 2 cups
2 cups 3 cups
3 cups 3.5 cups
4 cups 5 cups
5 cups 6 cups
Rice quantity Water quantity
1 cups 2 cups
2 cups 3 cups
3 cups 3.5 cups
4 cups 5 cups
6 cups 7 cups
8 cups 9 cups
10 cups 11 cups
15 cups 16 cups
RC650 -B1
RC1050 -B1
RC1850
RC1860 -B1
RC2850
6