REMOÇÃO DE PÓ
ADVERTENCIA: Perigo de Incêndio.
O pó de lixamento de revestimentos coletados de superfícies de lixamento
(poliuretano, óleo de linhaça, etc.) podem pegar fogo em dentro de sacolas de pó de lixadeiras ou em outros lugares e
produzir fogo. Para reduzir os riscos, esvazie os recipientes com freqüência e siga com rigor o manual da lixadeira e as
instruções do fabricante do revestimento.
ADVERTENCIA: P erigo de fogo.
Ao trabalhar com superfícies metálicas, não use o recipiente de pó ou um aspirador
de pó, porque há uma geração de faíscas. Use óculos de proteção e uma máscara de pó. Devido ao perigo do fogo, não
use a sua lixadeira para lixar superfícies de magnésio. Não use para lixamento úmido.
MANUTENÇÃO
A sua ferramenta foi projetada para operar durante um longo período de tempo com um mínimo de manutenção.
A operação contínua satisfatória depende dos cuidados adequados com a ferramenta e uma limpeza regular.
• Limpe as saídas e fendas de resfriamento com um pano úmido limpo. Não use solventes.
ACESSÓRIOS
Os acessórios recomendados para serem utilizados com a sua ferramenta estão disponíveis a um custo adicional no seu
representante local ou assistência técnica autorizada.
ADVERTENCIA:
O uso de qualquer acessório não recomendado para uso com esta ferramenta pode ser perigoso.
VERIFICAÇÃO E SOLUÇÃO DE PROBLEMAS
PROTEÇÃO AO MEIO AMBIENTE
Coleta Seletiva.
Este produto não deve ser descartado junto com o lixo doméstico normal.
Caso ache necessário que seu produto Black & Decker seja substituído, ou caso não seja mais útil para você, não
jogue-o fora junto com o lixo doméstico normal. Disponibilize este produto para coleta seletiva.
A coleta seletiva de produtos e embalagens usadas permite que os materiais sejam reciclados e
utilizados novamente. A reutilização de materiais reciclados ajuda a prevenir poluição ambiental e reduz
a demanda de matéria prima.
Regulamentos locais podem prever a coleta seletiva de produtos elétricos domésticos, em lixeiras municipais ou
pelo vendedor ao comprar um produto novo.
ASSISTÊNCIA TÉCNICA
A Black & Decker possui uma das maiores Redes de Serviços do País, com técnicos treinados para manter e reparar
toda a linha de produtos Black & Decker. Ligue: 0800-703 4644 ou consulte nosso site: http://www.blackedecker.com.br,
para saber qual é a mais próxima de sua localidade.
ESPECIFICAÇÕES
Voltagem
AR
220V ~ 50Hz
B2C
220V ~ 50-60Hz
B3
120V ~ 60Hz
B2
220V ~ 60Hz
BR
127V ~ 60Hz
Potência
AR, B2C, B2, BR
180W
B3
200W
Órbitas por Minuto (OPM)
AR, B2C, B2, BR
13500
B3
14500
PROBLEMA
• O aparelho não liga.
PROVÁVEL CAUSA
• O cabo/fio não está ligado à
tomada.
• O fusível do circuito está
queimado.
• O disjuntor está desarmado.
• O cabo/fio ou o interruptor está
danificado.
PROVÁVEL SOLUÇÃO
• Ligue a ferramenta àa uma
tomada que esteja funcionando.
• Substituta o fusível do circuito.
(Se o produto fizer com que o
fusível queime repetidamente,
pare de utilizar o produto e
providencie o seu conserto em
um centro de serviços da Black
& Decker ou assistência técnica
autorizada.)
• Religue o disjuntor (se o
produto fizer com que o disjuntor
fique desarmado repetidamente,
pare de utilizar o produto
imediatamente e providencie o
seu conserto em um centro de
serviços da Black & Decker ou
assistência técnica autorizada).
• Substitua o cabo/fio ou
interruptor em um Centro de
Serviços da Black & Decker ou
Assistência Técnica Autorizada.
KEY INFORMATION YOU SHOULD KNOW:
• For aggressive material removal, use several controlled passes at a shallow depth of cut.
• For optimum results use smooth uninterrupted passes.
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below, may
result in electric shock, fire and/or serious personal injury.
SAFETY INSTRUCTIONS
General power tool safety warnings
Warning! Read all safety warnings and all instructions.
Failure to follow the warnings and
instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below
refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust
. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of electric shock.
NOTE:
The term "Residual Curent Device (RCD)" can be replaced by "Ground Fault Circuit Interrupter (GFCI)" or by
"Earth Leakage Circuit Breaker (ELCB)".
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye, ear and respiratory protection.
Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the
job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
5. Service
a. Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will
ensure that the safety of the power tool is maintained.
6. Electrical Safety
Your tool is double insulated; therefore no earth wire is required. Always check that the main voltage
corresponds to the voltage on the rating plate.
Warning!
If the power cord is damaged, it must be replaced by the manufacturer, authorized Black & Decker
Service Center or an equally qualified person in order to avoid damage or injury. If the power cord is replaced
by an equally qualified person, but not authorized by Black & Decker, the warranty will not be valid.
7. Labels on Tool
The label on your tool may include the following symbols:
Read Instruction Manual
Use Eye Protection
Use Ear Protection
•
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction
activities. Wear protective clothing and wash exposed areas with soap and water.
Allowing dust to get into
your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
WARNING:
Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory
or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct
particles away from face and body.
ADDITIONAL SAFETY RULES
SAVE THESE INSTRUCTIONS
GENERAL SAFETY RULES
V...............................Volts
A.............................. Amperes
Hz............................ Hertz
W..............................Watts
min...........................minutes
...........................Alternating current
...........................Direct current
n
0
............................. No load speed
...........................Class II Construction
...........................Earthing terminal
...........................Safety alert symbol
.../min...................... Revolutions or reciprocations
per minute
PORTUGUÊS
ENGLISH
All manuals and user guides at all-guides.com
