Black & Decker PS122, Instructions For Use Manual

Page: 8 / 12

Screwdriving

Always use the correct type and size of screwdriver bit.

If screws are difficult to tighten, try applying a small
amount of washing liquid or soap as a lubricant.

Always hold the tool and screwdriver bit in a straight line
with the screw.
Maintenance
Your Black & Decker tool has been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.

Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.

Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.

Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:

Run the battery down completely, then remove it from the
tool.

NiCd and NiMH batteries are recyclable. Take them to any
authorised repair agent or a local recycling station.
Technical data
PS122 PS122H PS142
Voltage V
DC
12 12 14
No-load speed min
-1
0-400 0-1200 0-400
Max. torque Nm 20 20 23
Max. drilling capacity
steel mm 10 10 10
wood mm 25 25 30
masonry mm 10 10 10
Weight kg 1.3 1.3 1.3
PS14 PS18 PS182H
Voltage V
DC
14 18 18
No-load speed min
-1
0-1200 0-1200 0-1200
Max. torque Nm 23 27 27
Max. drilling capacity
steel mm 10 10 10
wood mm 25 25 38
masonry mm 10 10 10
Weight kg 1.3 1.3 1.3
Battery A12 A12NH A14 A14NH A18A A18NH
Capacity Ah 1.5 1.5 1.5 1.5 1.5 1.5
Battery type NiCd NiMH NiCd NiMH NiCd NiMH
Weight kg 0.6 0.6 0.7 0.7 0.9 0.9
Charger 3 hour 1 hour
Input voltage V
AC
230 230
Approx. charging time h 3 1
Weight kg 0.4 0.4
8