18
17
16
20
19
21
16 WATER SUPPLY LINES
Gently separate hot and cold supply tubes (
16A
66
), approximately three inches
apart. Connect water Supply Lines (
16C
) to Faucet Inlets (
16B
). (Supply lines
and fi ttings are not included.)
17 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
FAUCET FUNCTIONS
18 VALVE FUNCTION
By lifting the Lever Handle (
18A
18
18
) up, the valve will be activated allowing water to
fl ow. The water fl ow will increase by continuing to lift up the Lever Handle (
18A
18
18
).
By rotating the Lever Handle (
18A
18
18
) counterclockwise, the water temperature
will decreased to fully cold. By rotating the Lever Handle (
18A
18
18
) clockwise, the
water temperature will increased to fully hot.
19 SPOUT FUNCTION
The Spout (
19A
19
19
) can be rotated around the Faucet Body in any direction.
20 SIDE SPRAY OPERATION
(For products with side spray). The Side Spray (
20A
) can be pulled forward
to spray water in any direction. To activate the Side Spray, press the Toggle
Button (
20B
) located on the back of the Side Spray (
20A
).
21 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (
21A
). Turn Valve
(
21B
) on and allow both hot and cold water to run for at least one minute each.
While water is running, check for leaks. To clean the aerator, disassemble Aerator
Housing (
21A
) by separating the Aerator Shell (
21C
), Basket (
21D
), and Washer
(
21E
). Once parts have been cleaned, reassemble by reversing
21E
21E
steps.
5
ENGLISH
OPEN
CLOSED
HOT
COLD
18A
A
18A
A
16A
16A
A
16B
16C
16B
16C
19A
A
20A
20A
21A
21A
20A
20A
20B
21C
21D
21E
21B
