13 TUB SPOUT FUNCTION
When the valve is turned on, water normaly fl ows through the Tub Spout (
13A
).
To activate the shower, turn valve on and pull the Knob (
13B
) up. Hold on until
water fl ows continiously from the shower arm.
16 SHOWER HEAD INSTALLATION
Thread Shower Head (
16A
) onto Shower Arm (
16B
).
Thread Shower Head (
Thread Shower Head (
Make sure Shower Head (
16A
) is securely tightened to Shower Arm
(
16B
).
MAINTENANCE & CARE
..
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price
Pfi ster Consumer Service.
3.
Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative fi nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage.
Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
12 VALVE FUNCTION
By rotating the Lever Handle (
12A
) slightly counterclockwise, the valve will be
fully activated to the “COLD” position. The water temperature can be increased by
continuing to rotate the Lever Handle (
12A
) in a counterclockwise direction.
14 FINAL FLUSHING
For fi nal fl ushing, turn valve on and allow water to run through the Tub Spout
(
14A
) for several minutes. Pull Spout Knob (
14B
) up to allow water to run through
Shower Arm (
14C
). Allow water to run for several minutes untill all foreign mater
clears the line.
15 SHOWER HEAD FUNCTION
To adjust spray, turn Outer Shell (
15A
) to a desired spray pattern.
13
12
16
14
15
4
ENGLISH
FULL HOT
FULL COLD
CLOSED
OPEN
UP
For
Shower
12A
12A
13A
13A
13B
16A
16A
16B
14A
14A
14B
14C
15A
15A
