7
5. Once blending has finished, remove the personal jar by turning counterclockwise
and lifting off the base. Turn the jar over and place it on a flat surface.
IMPORTANT:
If the jar gets stuck on the blending base or begins to loosen from
the blade assembly, follow these steps:
a. Unplug the unit
b. Turn the jar clockwise to tighten jar onto the blade assembly
c. Turn jar and blade assembly counterclockwise to unlock
from blending base and lift up.
6. Remove the blade assembly from the personal jar by turning
counterclockwise. Place the personal jar drinking lid on the personal jar and
enjoy your delicious drinks on the go.
AUTO FUNCTIONS
This blender features 5 different AUTO functions, pre-programmed cycles
to deliver exceptional results for a wide variety of recipes. To use an AUTO
function:
1.
Press AUTO. Once pressed, all numbered buttons will blink
2. Press the button of the desired function as listed in the chart below:
AUTO
number
1
2
3
4
5
Meal
Soup
Nut
Butters
Personal Jar /
Half Recipes
Dry Goods
Smoothies
Description
Puree
perfectly
creamy
soups
Cream
smooth or
chunky nut
butters
Use with
personal jar
(not included
with all
models) or
when making
a smaller
recipe/
serving
Grind and
chop dry
ingredients
Blend frozen
fruits and
ingredients
into a thick
consistency
Tips
When
blending
hot liquids,
do not fill
blender jar
more than
2/3 full to
allow for
expansion
during
blending and
to prevent
splattering.
Do not
exceed 3
cups of
nuts or use
less than 2
cups when
making nut
butters.
Do not fill
past the
20oz. mark.
For best
results using
personal
jar, add
ingredients in
the following
order:
liquids, ice,
hard foods,
soft foods,
powders.
When
blending dry
goods, do not
exceed 2 cups
volume.
Place dry
goods (rice,
corn) in
freezer 15
minutes prior
to blending
to prevent
overheating.
For best
results
using full
size blender
jar, place
ingredients
in the
following
order:
Liquids,
powders,
soft foods,
hard foods,
ice.
Note:
When blending dry goods, you may experience abrasions on the inside of
the jar, making it cloudy. This is not preventable but is normal and will not impact
the performance of the blender.
