7
2. For prolonged storage such as over the winter, the battery pack should be fully
charged and then removed from the charger. It should be charged again just prior
to use.
LEAVING THE BATTERY PACK IN THE CHARGER
It is OK to leave battery packs on charge for long periods of time. The charger has a
maintenance mode which gives the battery pack enough charge to stay “topped off”.
If however, the tool is not expected to be needed for more than 30 days, unplug the
charger and store battery pack in a cool, dry location.
NOTE:
A battery pack will lose
its charge when kept off of the charger. If the battery pack has not been kept on
maintenance charge, it may need to be recharged before use. A battery pack may also
lose its charge if left in a charger that is not plugged into an appropriate AC source.
ASSEMBLY INSTRUCTIONS
Before assembling your Cordless String Trimmer, check that you have received the
following in the shipping carton. See
figure 1
.
A. Guard & screws
B. Charger
C. Nicad Battery Packs
D. Trimmer/Edger
E. Auxiliary Handle
ASSEMBLING AND
ATTACHING THE TWO PIECE
GUARD
WARNING:
Remove battery
pack from tool before attempting to
attach the guard or make any adjustment.
NEVER OPERATE TOOL WITHOUT
GUARD FIRMLY IN PLACE. The guard
must always be on the tool to protect the
user.
TO ASSEMBLE:
• Remove the two guard sections from the
carton.
• Holding the sections as shown in figure 2,
insert the tab from the first guard section into
the slot of the second guard section. See
inset.
•
Insert the side tab from the first guard section
into the slot of the second guard section until
you hear them “snap” together
(figure 3)
.
Slot
3
2
Tab
1
A
E
D
B
C
