background image

English

6

Repairs

 

WARNING:

 To assure product SAFETY and RELIABILITY, 

repairs, maintenance and adjustment (including 
power cord repairs, and brush inspection and 
replacement, when applicable) should be performed 
by a BLACK+DECKER factory service center or a 
BLACK+DECKER authorized service center. Always use 
identical replacement parts.

Accessories

 

WARNING:

 Since accessories, other than those 

offered by  BLACK+DECKER, have not been tested with 
this product, use of such accessories with this tool 
could be hazardous. To reduce the risk of injury, only  
BLACK+DECKER recommended accessories should be 
used with this product.

Recommended accessories for use with your tool are 
available at extra cost from your local dealer or authorized 
service center. If you need assistance in locating 
any accessory, please contact  BLACK+DECKER call 

1‑800‑544‑6986

.

Cleaning

 

WARNING:

 Blow dirt and dust out of all air vents with 

clean, dry air at least once a week. To minimize the risk 
of eye injury, always wear ANSI Z87.1 approved eye 
protection when performing this procedure.

 

WARNING:

 Never use solvents or other harsh 

chemicals for cleaning the non‑metallic parts of the 
tool. These chemicals may weaken the plastic materials 
used in these parts. Use a cloth dampened only with 
water and mild soap. Never let any liquid get inside the 
tool; never immerse any part of the tool into a liquid.

MAINTENANCE

 

WARNING: To reduce the risk of serious personal 
injury, turn unit off and disconnect it from 
power source before making any adjustments or 
removing/installing attachments or accessories.

 

An accidental start‑up can cause injury.

Your BLACK+DECKER power tool has been designed to 
operate over a long period of time with a minimum of 
maintenance. Continuous satisfactory operation depends 
upon proper tool care and regular cleaning.

On/Off Switch (Fig. A)

•  To switch the tool on, depress the on/off switch 

 1 

 at the 

“I” position.

•  To switch the tool off, depress the on/off switch at 

the”O” position.

Proper Hand Position (Fig. F)

 

WARNING:

 To reduce the risk of serious personal injury, 

ALWAYS

 use proper hand position as shown. 

 

WARNING:

 To reduce the risk of serious personal injury, 

ALWAYS

 hold securely in anticipation of a sudden 

reaction.

Proper hand position requires one hand on the main handle 
as shown in Fig. F. 

Precautions to Take When Sanding Paint

Sanding of lead based paint is NOT RECOMMENDED due 
to the difficulty of controlling the contaminated dust. 
The greatest danger of lead poisoning is to children and 
pregnant women.
Since it is difficult to identify whether or not a paint contains 
lead without a chemical analysis, we recommend the 
following precautions when sanding any paint:

1. 

PERsOnAl sAFETY

 

No children or pregnant women should enter the 
work area where the paint sanding is being done 
until all clean up is completed.

 

A dust mask or respirator should be worn by all 
persons entering the work area. The filter should be 
replaced daily or whenever the wearer has difficulty 
breathing. See your local hardware store for the 
proper NIOSH-approved dust mask.

 

NO EATING, DRINKING or SMOKING should be done 
in the work area to prevent ingesting contaminated 
paint particles. Workers should wash and clean up 
BEFORE eating, drinking or smoking. Articles of food, 
drink, or smoking should not be left in the work area 
where dust would settle on them.

2. 

EnViROnMEnTAl sAFETY

 

Paint should be removed in such a manner as to 
minimize the amount of dust generated.

 

Areas where paint removal is occurring should be 
sealed with plastic sheeting of 4 mils thickness.

 

Sanding should be done in a manner to reduce 
tracking of paint dust outside the work area.

3. 

ClEAning AnD DisPOsAl

 

All surfaces in the work area should be vacuumed 
and thoroughly cleaned daily for the duration of 
the sanding project. Vacuum filter bags should be 
changed frequently.

 

Plastic drop cloths should be gathered up and 
disposed of along with any dust chips or other 
removal debris. They should be placed in sealed 
refuse receptacles and disposed of through regular 
trash pick-up procedures. During clean up, children 
and pregnant women should be kept away from the 
immediate work area.

 

All toys, washable furniture and utensils used by 
children should be washed thoroughly before being 
used again.

OPERATION

 

WARNING: To reduce the risk of serious personal 
injury, turn unit off and disconnect it from 
power source before making any adjustments or 
removing/installing attachments or accessories.

 

An accidental start‑up can cause injury.

Summary of Contents for MOUSE BDEMS230

























Reviews: