INSTRUCTION MANUAL
40v MAx* Lithium Trimmer/Edger
Thank you for choosing BLACk+DECkER!
PLEASE READ BEfORE RETURNINg ThIS PRODUCT fOR
ANy REASON.
If you have a question or experience a problem with your BLACk+DECkER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - fri. to speak with an agent.
Please have the catalog number available when you call.
SAvE ThIS MANUAL fOR fUTURE REfERENCE.
vEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIvO DE OPERACIÓN, CENTROS DE SERvICIO y PÓLIZA DE gARANTÍA.
ADvERTENCIA: LÉASE ESTE INSTRUCTIvO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 40
volts. The nominal voltage is 36.
CATALOg NUMBER
LST540
To register your new product, visit
www.BlackandDecker.com/NewOwner
kEy INfORMATION yOU ShOULD kNOW:
• The guard must be installed before trimming or edging - if not, the
motor will overheat (page 7).
• When replacing the line, use only .080 inch diameter ROUND line
(B+D Model #
SF-080
is recommended) - otherwise the appliance will
not function properly (page 10).
• Do not bump the feed head against the ground - it will disrupt the
feed mechanism.
• For use only with lithium-ion 36v or 40v Max* batteries.
