English
11
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
Slow running, noisy or hot
blades.
• Dry, corroded blades.
• Lubricate blades.
• Blades or blade support bent.
• Straighten blade or blade support.
• Bent or damaged teeth.
• Straighten teeth.
• Loose blade bolts.
• Tighten blade bolts.
Unit will not start.
• Battery not installed properly.
• Check battery installation.
• Battery not charged.
• Check battery charging requirements.
• Lock off not fully operated.
• Check that lock off is fully pulled back prior
to moving
Battery won’t charge
• Battery not inserted into charger.
• Insert battery into charger until green LED
appears. Charge up to 8 hours if battery
totally drained.
• Charger not plugged in.
• Plug charger into a working outlet.
Refer to
Important Charging Notes
for
more details.
• Check current at receptacle by plugging in
a lamp or other appliance.
• Check to see if receptacle is connected to
a light switch which turns power off when
you turn out the lights.
• Surrounding air temperature too
hot or too cold.
• Move charger and tool to a surrounding
air temperature of above 40
°
F (4.5 °C) or
below 104
°
F (+40 °C).
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.
