5. Connect the AC adapter cord to the control box
For troubleshooting and support, scan
code or visit
7. Plug in your AC adapter to the power source
10
6. Route and hide wires as desired using wire clips and/or
zip ties (See Routing Wires Section PG. 7)
1. Mount control box in desired location
4. Using jumper wires, connect the control box to the first
light bar(s) and light bars to each other.
2. Slide two bar mounting clips onto each light bar
See Routing Jumpers Wires section for tips (PG. 7)
3. Using the provided mounting spacer, mount bar lights
and hold in place for 10 seconds
9
How to Install
