COLD
REV
3 mil
5 mil
HELPFUL TIPS
• Do not laminate any heat sensitive documents such as tickets, ultrasounds, etc.
You may experiment using self-adhesive laminating pouches and the cold mode
setting with heat sensitive documents.
• Always test with a non-sensitive document first to ensure compatibility.
• Do not laminate any valuable or historical type documents.
• Never laminate an empty pouch.
• Always feed the pouch into the machine sealed edge first. This will prevent the
pouch from becoming jammed in the laminator rollers.
• If using a larger pouch for a smaller sized item, you can easily trim the pouch
after laminating using a paper trimmer or scissors. Laminated documents are
easily trimmed once cooled.
• A rotary paper trimmer is recommended.
• Do not use laminator with self-adhesive laminating sheets, only self-adhesive
pouches.
1.
Place laminator on a flat, stable surface. Organize your materi-
als close by and ensure that you have space to work comfortably.
This entails having enough surface area to:
• Align items in laminating pouches
• Let items lay flat for cooling post lamination
2.
Locate the out-feed table, which is stored underneath the
laminator (certain models only). Fold open the table to its most
outright position.
3.
Plug the power cord into a standard 120 V outlet.
DOCUMENT PREPARATION
For optimum results use Black & Decker TimeShield™ laminating pouches.
Please visit Laminating.BlackandDecker.com/Laminators for more information and
where to buy.
1.
Select the pouch size and thickness that best fits the item you
wish to laminate and offers the level of protection you desire.
BEFORE LAMINATING
4
