Black & Decker KW850E, Manual

Page: 13 / 100

13
E N G L I S H
◆
The router bit must extend below the flange of
the template guide, to cut the workpiece in the
shape of the template.
Using the distance piece (fig. N)
The distance piece can be used for trimming
wooden or laminate vertical projections.
Using the centring pin (fig. O)
The centring pin can be used to cut out circular
patterns.
◆
Drill a hole for the point of the centring pin in
the centre of the circle to be cut.
◆
Place the router on the workpiece with the
point of the centring pin in the drilled hole.
◆
Adjust the radius of the circle with the bars of
the edge guide.
◆
The router can now be moved over the
workpiece to cut out the circle.
Using the copy follower (fig. P)
The copy follower helps to maintain an equal
cutting distance along the edge of irregularly
shaped workpieces.
◆
Place the router on the workpiece at the
desired distance from the edge to be copied.
◆
Adjust the bars of the edge guide until the
wheel is in contact with the workpiece.
Switching on and off (fig. A)
Switching on
◆
Keep the lock-off button (2) depressed and
press the on/off switch (1).
◆
Release the lock-off button.
Switching off
◆
Release the on/off switch.
Hints for optimum use
◆
When working on outside edges, move the
tool counterclockwise (fig. J). When working on
inside edges, move the tool clockwise.
◆
Use HSS router bits for softwood.
◆
Use TCT router bits for hardwood.
◆
You can use the tool without a guide (fig. K).
This is useful for signwriting and creative work.
Only make shallow cuts.
◆
Refer to the table below for common types of
router bits.
Router bits (fig. L)
Description Application
Straight bit (1) Grooves and rebates
Trimming bit (2) Trimming laminates or
hardwood; accurate profiling
using a template
Rebating bit (3) Rebates on straight or curved
workpieces
V-grooving bit (4) Grooves, engraving and
edge bevelling
Core box bit (5) Fluting, engraving and
decorative edge moulding
Cove bit (6) Decorative edge moulding
Ogee moulding bit (7) Decorative edge moulding
Rounding over bit (8) Rounding over edges
Dovetail bit (9) Dovetail joints
Chamfer bit (10) Chamfer edges
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Before performing any maintenance,
switch off and unplug the tool.
◆
Regularly clean the ventilation slots in your tool
using a soft brush or dry cloth.
◆
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
PROTECTING THE ENVIRONMENT
Black & Decker provides a facility for
recycling Black & Decker products once
they have reached the end of their
working life. This service is provided free
of charge. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.