background image

5

ENGLISH

Note:

 Double insulation does not take the place

of normal safety precautions when operating the
tool. The insulation system is for added protection
against injury resulting from a possible electrical
insulation failure within the tool.

ELECTRICAL SAFETY

Be sure the supply is the same as the voltage given on
the rating plate. The tool is fitted with a two-core cable
and plug.

MAINS PLUG REPLACEMENT (UK ONLY)

Should the mains plug need replacing and you are
competent to do this, proceed as instructed below.
If you are in doubt, contact a Black & Decker service
centre or a qualified electrician.
• Disconnect the plug from the power supply.
• Cut off the plug and dispose of safely. A plug with

bared copper conductors is very dangerous if
engaged in a live socket outlet.

• Only fit BS1363A approved plugs fitted with the

correctly rated fuse.
Note: Fuses do not give personal protection against
electric shock.

• The cable wire colours, or a letter, will be marked at

the connection point of most good quality plugs.
Attach the wires to their respective points in the
plug (see diagram). Brown is L (live) and blue is N
(neutral).

Fit a 5 amp fuse

approved

to BS1362

N

L

E

230 volts AC only 

Never use a light 

socket

Make sure that the 
outer sheath of the 
cable is held firmly 
by the clamp

Fit a BS1363A 
approved 
resilient plug

Connect 
blue to 
N (neutral)

Connect 

brown to 

L (live)

• Before replacing the top cover of the plug ensure

that the cable restraint is holding the outer sheath of
the cable firmly and that the two leads are correctly
fixed at the terminal screws. If the fuse cover is
missing or damaged do not use the plug.
For replacement or detachable fuse covers, contact
a Black & Decker service centre.

Warning!

 Never connect live or neutral wires to the

earth pin marked E or 

.

MAINS PLUG REPLACEMENT
(AUSTRALIA AND NEW ZEALAND ONLY)

Should the mains plug or cordset of the product be
damaged, it must only be replaced by an authorised
Black & Decker service agent because special
purpose tools are required.

EXTENSION CABLES

Up to 30m (100ft) of 3-core extension cable can be used
without undue loss of power.

Note: 

An extension cable should not be used unless

absolutely necessary. Use of an improper extension
cable could result in a risk of fire and electric shock.
If an extension cable must be used, make sure it is
properly wired, contains the correct rated fuse as
recommended in its literature and is in good
electrical condition.

PROTECTING THE ENVIRONMENT

Black & Decker provides a facility for recycling
Black & Decker products once they have
reached the end of their working life.
This service is provided free of charge. To take
advantage of this service please return your
product to any authorised repair agent who
will collect them on our behalf.

You can check the location of your nearest authorised
repair agent by contacting your local Black & Decker
office at the address indicated in this manual.
Alternatively, a list of authorised Black & Decker
repair agents and full details of our after-sales
service and contacts are available on the Internet at:

www.2helpU.com

.

GUARANTEE

Black & Decker is confident of the quality of its
products and offers an outstanding guarantee.
This guarantee statement is in addition to and in no
way prejudices your statutory rights. The guarantee
is valid within the territories of the Member States of
the European Union and the European Free Trade Area.

Summary of Contents for KS629-638SE













Reviews: