Black & Decker KP600, Manual

Page: 8 / 28

8
ENGLISH
Maintenance
Your Black & Decker Power Tool has been
designed to operate over a long period of time with
a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool
care and regular cleaning.
WARNING! Unplug the tool before cleaning it. Use
only mild soap and a damp sponge to clean
polisher. Do not immerse any part in liquid.
To prolong pad life and shape, always store
polisher with pad face up.
Remove bonnet from pad when polisher is not in
use so that pad can dry out and retain its original
shape.
Important: To ensure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual)
should be performed by authorized service centers
or other qualified organizations, always using
identical replacement parts. Unit contains no user
serviceable parts inside.
Accessories
The performance of any power tool is dependent
upon the accessory used. Black & Decker
accessories are engineered to high quality
standards and are designed to enhance the
performance of power tool.
Buying a Black & Decker accessory will ensure
that you get the very best from your Black &
Decker tool.
Black & Decker offers a large selection of
accessories available at your local dealer or
authorized service center at extra cost.
The only accessories recommended for use with
this polisher are:
74-603 - Black & Decker 152mm Waxing/Polishing
Multi-Pack
CAUTION: The use of any non-recommended
accessories may be hazardous.
Service Information
Black & Decker offers a full network of
company-owned and authorized service locations
throughout Middle East & Africa. All Black &
Decker Service Centers are staffed with trained
personnel to provide customers with efficient and
reliable power tool service.
Whether you need technical advice, repair, or
genuine factory replacement parts, contact the
Black & Decker location nearest to you.
Waxer/Polisher KP600-AE, B1, B5 KP600-TW
Power input W 60 60
Power Voltage V 220-240 110
Frequency Hz 50-60 60
No load speed RPM 4,400 4,400
Sanding Plate
Diameter
mm ø152 ø152
Weight Kg 1.4 1.4
Cable Length M 3 3
Technical Data