5
ENGLISH
Fitting regular sanding sheets (fig. A)
Warning!
Make sure that the tool is switched off and unplugged.
X
Soften the sanding sheet by rubbing its non-abrasive side
over the edge of a worktop.
X
Press the paper clamp levers (3) upwards to release them
from the retaining grooves and open the paper clamps (3)
by pressing them down.
X
Place the sheet onto the sanding base (4).
X
Insert the edge of the sanding sheet into the front paper
clamp (3) as shown.
X
Press the front paper clamp lever (3) downwards and
locate it in the retaining groove.
X
While keeping a slight tension on the sheet, insert the rear
edge of the sheet into the rear paper clamp (3).
X
Press the rear paper clamp lever (3) downwards and locate
it in the retaining groove.
Connecting a vacuum cleaner (fig. C)
X
Insert the adaptor (5) into the dust extraction outlet (2).
X
Connect the hose (6) of the vacuum cleaner to the
adaptor (5).
Use
Warning!
Let the tool work at its own pace. Do not overload.
Switching on and off (fig. B)
X
To switch the tool on, press the part of the on/off switch (1)
marked '
I
'.
X
To switch the tool off, press the part of the on/off switch (1)
marked '
0
'.
Hints for optimum use
X
Do not place your hands over the ventilation slots.
X
Always hold the tool with both hands (fig. D).
X
Do not exert too much pressure on the tool.
X
Regularly check the condition of the sanding sheet.
Replace when necessary.
X
Always sand with the grain of the wood (fig. D).
X
When sanding new layers of paint before applying another
layer, use extra fine grit.
X
On very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces, start with
a medium grit. In both cases, gradually change to a fine grit
for a smooth finish.
X
Consult your retailer for more information on available
accessories.
Maintenance
X
Your Black & Decker tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
X
Before performing any maintenance, switch off and unplug
the tool.
X
Regularly clean the ventilation slots in your tool using a soft
dry brush or dry cloth.
X
Regularly clean the motor housing using a clean damp
cloth. Do not use any abrasive or solvent-based cleaner.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your tool needs
replacement, or if it is of no further use to you,
think of the protection of the environment. Black
& Decker repair agents will accept old Black &
Decker tools and ensure that they are disposed
of in an environmentally safe way.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at:
www.2helpU.com.
Technical data
KA300
Voltage
Vac 230
Power output
W
135
Oscillations (no load)
min
-1
22,000
Orbits (no load)
min
-1
11,000
Weight
kg
1.2
