Black & Decker HPL10RS Original Instructions Manual Download Page 10

10

ENGLISH

(Original instructions)

EC declaration of conformity

MACHINERY DIRECTIVE

%

HPL10RS

Black & Decker declares that these products described under 

"technical data" are in compliance with:

2006/42/EC, EN 60745-1, EN 60745-2-11

For more information, please contact Black & Decker at the 

following address or refer to the back of the manual.

The undersigned is responsible for compilation of the technical 

file and makes this declaration on behalf of Black & Decker.

_

Kevin Hewitt

Vice-President Global Engineering

Black & Decker Europe, 210 Bath Road, Slough,

Berkshire, SL1 3YD

United Kingdom

16/11/2010

Guarantee

Black & Decker is confident of the quality of its products and 

offers an outstanding guarantee. This guarantee statement is 

in addition to and in no way prejudices your statutory rights. 

The guarantee is valid within the territories of the Member 

States of the European Union and the European Free Trade 

Area.

If a Black & Decker product becomes defective due to faulty 

materials, workmanship or lack of conformity, within 24 

months from the date of purchase, Black & Decker guarantees 

to replace defective parts, repair products subjected to fair 

wear and tear or replace such products to ensure minimum 

inconvenience to the customer unless:

u

  The product has been used for trade, professional or hire 

purposes;

u

  The product has been subjected to misuse or neglect;

u

  The product has sustained damage through foreign 

objects, substances or accidents;

u

  Repairs have been attempted by persons other than 

authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of 

purchase to the seller or an authorised repair agent. You can 

check the location of your nearest authorised repair agent 

by contacting your local Black & Decker office at the address 

indicated in this manual. Alternatively, a list of authorised 

Black & Decker repair agents and full details of our after-

sales service and contacts are available on the Internet at: 

www.2helpU.com

Please visit our website www.blackanddecker.co.uk to register 

your new Black & Decker product and to be kept up to date 

on new products and special offers. Further information on the 

Black & Decker brand and our range of products is available 

at www.blackanddecker.co.uk

Summary of Contents for HPL10RS













Reviews: