9
ENGLISH
(Original instructions)
u
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
u
Or run the battery down completely if it is integral and then
switch off.
u
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior (when fitted).
u
After use, carefully clean the blades. After cleaning, apply
a film of light machine oil to prevent the blades from
rusting.
Storage
When the tool will not be used for several months, ideally
leave the battery connected to the charger. Otherwise proceed
as follows:
u
Fully charge the battery.
u
Store the tool in a secure and dry location. The storage
temperature must always remain in the range of +10 °C to
+40 °C.
u
Before using the tool after prolonged storage, fully charge
the battery again.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
GSBD700
Voltage
V
DC
7.0
Blade strokes (no load)
min
-1
850
Blade length (shear)
cm
10
Blade gap (shear)
mm
23
Blade length (trimmer)
cm
15
Blade gap (trimmer)
mm
8
Blade brake time
s
< 1
Weight
kg
0.65
Charger
905450XX
905527XX
90600XXX
Input voltage
V
AC
230
230
Output voltage
V
DC
9
10
Current
mA
100
120
Approx. charging time
h
19
14
Weight
kg
0.15
0.15
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
h
) 3.1 m/s
2
, uncertainty (K) 1.5 m/s
2
Level of sound pressure according to EN 60745:
Sound pressure (LpA) 66 dB(A), uncertainty (K) 3 dB(A)
Sound power (LWA) 77 dB(A), uncertainty (K) 3 dB(A)
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
%
GSBD700 Shear/Shrubber
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1
:
2009 + A11:2010,
EN 60745-2-15: 2009 + A1
:
2010
2000/14/EC, Trimmer, Annex V
Level of acoustic power according to (5) 2000/14/EC
(Article 13):
L
WA
(measured sound power) 77 dB(A)
L
WA
(guaranteed sound power) 82 dB(A)
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more information, please
contact Stanley Europe at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Ray Laverick
Director of Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
17/12/2015
Summary of Contents for GSBD700
