Black & Decker GR1000 Instruction Manual Download Page 18

18 • ENGLISH

4.  Never use the lawnmower,

 

f

  When people, especially children,  

 

 

 

or pets are nearby;

 

f

  If the operator has taken medicine or substances  

 

 

that can affect his ability to react and concentrate. 

5.  Keep in mind that the operator or user is  

 

responsible for accidents or hazards occuring to  

 

other people or their property.

PREPARATION

1.  While mowing, always wear substantial footwear  

 

and long trousers. Do not operate the equipment,  

 

when barefoot or wearing open sandals.

2.  Thoroughly inspect the area where the equipment is  

 

to be used and remove all objects which may be thrown  

 

by the machine (stones, sticks, metal wire, bones, etc.).

3.  Before using, always carry out a visual inspection,  

 

particularly of the blade, seeing that the screws  

 

and cutter assembly are not worn or damaged.  

 

Replace worn or damaged blades and screws in sets  

 

to preserve balance.

4.  Before mowing, attach the discharge opening guards  

 

(grass catcher or deflector).

 Warning! Danger. Damp and electricity do not go together

 

f

  The handling and connection of cables must be  

 

 

done in the dry;

 

f

  Use a 30 mA residual current device (RCD);

 

f

  Never allow contact between an electric socket  

 

 

or cable with a wet area (puddles or damp grass);

 

f

  Connections between cables and sockets must  

 

 

be of the waterproof type. Only use extension  

  cables with moulded-on waterproof or approved  

 

 

sockets available commercially.

5.  The power supply cables must not be of lower quality  

 

than the H05RN-F. H05RR-F. H05WF. H05VVH2-F  

 

type for outdoor use and with minimum cross-section  

 

size of 1.5 sq. mm.

6.  Clamp the cable onto the cable-hook before starting  

 

the equipment.

7.  The permanent connection of any electrical device  

 

to a building circuit must be performed by a   

 

qualified electrician, in accordance with electrical  

 

regulations in force. An incorrect connection may  

 

cause severe injury or death.

OPERATION

1.  Mow only in daylight or good artificial light.

2.  Avoid operating the equipment in wet grass or when raining.

3.  Never go over the electric cable with the

 

lawnmower. While cutting, the cable should always be  

 

pulled behind the lawnmower and always from  

 

the area of grass already cut. Use the cable hook  

 

in the way already described in this manual to avoid  

 

the cable’s unexpected disconnection. Ensure that it is  

 

properly inserted and avoid forcing into the power socket.

4. Never pull the lawnmower by its power cable or pull  

 

the cable to remove the plug. Do not expose the cable  

 

to sources of heat or let it come in contact with oil,  

 

solvents or sharp objects.

5.  Always be sure of your footing on slopes.

6. Walk, 

never run and do not allow yourself to be

 

pulled along by the lawnmower.

7.  Mow across the face of slopes, never up and down.

8.  Exercise extreme caution when changing direction on slopes.

9.  Do not mow on slopes of more than 20°.

10.  Exercise extreme caution when pulling the lawnmower  

 

towards you.

11.  Stop the blade if the lawnmower has to be tilted

 

for transportation when crossing surfaces other than  

 

grass, and when transporting the lawnmower to and  

 

from the area to be mowed

12. Never operate the lawnmower with defective guards,  

 

or without safety devices, for example deflectors and/ 

 

or grass catchers, in place.

13.  On those models with drive traction, disengage the  

 

drive clutch before starting the motor.

14.  Start the motor or switch on the motor carefully according  

 

to instructions and with feet well away from the blade.

15.  Do not tilt the lawnmower when starting the motor or  

 

switching on the motor. Start the motor or motor on a  

 

flat surface that is free of obstacles and tall grass.

16.  Do not put hands or feet near or under rotating parts.  

 

Keep clear of the discharge opening at all times

17. Never pick up or carry a lawnmower while the motor is  

 running.

18.  Stop the motor and disconnect the power supply cable:

 

f

  Before carrying out any work beneath the cutting  

 

 

deck or unclogging the chute;

 

f

  Before checking , cleaning or working on lawnmower;

 

f

  After striking a foreign object inspec the  

  lawnmower for damage and make repairs before  

 

 

restarting and operating the lawnmower; if  

 

 

the lawnmower starts to vibrate abnormally  

 

 

immediately check and remove the cause  

 

 

of the vibration;

 

f

  Whenever you leave the lawnmower unattended;

 

f

  When transporting the equipment.

19.  Stop the motor:

 

f

  Every time the grass catcher is removed  

 

 

or replaced.

 

f

  Before regulating the grass cutting height.

20.  When mowing, always keep to a safe distance

 

from the rotating blade. This distance is the length

 

of the handle.

MAINTENANCE AND STORAGE

1.  Keep all nuts,bolts and screws tight to be sure  

 

the equipment is in safe working condition. Regular  

 

maintenance is essential for safety and for    

 

maintaining performance levels.

Summary of Contents for GR1000






















Reviews: