Black & Decker FV1200, User Manual

Page: 7 / 20

English
-7-
• Do not store in locations where the
temperature may exceed 40
°
C.
• Charge only at ambient temperatures
between 10
°
C and 40
°
C.
• Do not incinerate the battery.
• When disposing of batteries, follow the
instructions given in the section
"Protecting the environment".
• Have defective cords replaced
immediately.
• Do not expose the charging base to
water.
• Do not open the charging base.
• Do not probe the charger.
Electrical safety
Your charger has been designed for a
specific voltage.
Always check that the mains voltage
corresponds to the voltage on the rating
plate. Never attempt to replace the charger
unit with a regular mains plug.
The charger is intended for indoor
use only.
Read the instruction manual before
use.
The charger automatically shuts off
if the ambient temperature
becomes too high. As soon as the
ambient temperature has cooled
down, the charger will resume
operating.
Charge only at ambient
temperatures between 10
°
C and
40
°
C.
Charging.
Features
1. Pivot lock trigger
2. Dust container door
3. Release latch (for dust container door)
4. Charging base
5. Charging indicator
6. Pivoting arm
7. Beater bar/vac head
8. Maintenance access panel
9. Beater bar/vac On/Off switch
Installation
Attaching the handle to the appliance
(fig. A)
• Align the D-handle with the main body of
the unit and push it down until it is fully
seated.
• Remove the phillips head screw from the
plastic bag.
• Insert the screw (13) into the hole.
• Tighten the screw (13) using a phillips
screwdriver.
Charging base (fig. B)
Place the charging base (4) on the floor,
convenient to an electrical outlet. The Pivot
Plus® slim vac is stored and charged in the
base whenever it is not in use.
Warning! Falling/tripping hazard. Do not
place the charging base on any elevated
surface. The appliance is designed to be
placed into and removed from the charging
base when it is sitting on the floor
convenient to an electrical outlet.
+40
∫
C
+10
∫
C