5
ENGLISH
How to use the spray acces-
sory
Always make sure that the iron is unplugged
and not hot while filling water into the spray
accessory. Press the Accessory release button
on top to releases the spray accessory. Pull the
water tank off the accessory from below .Fill the
water tank from a water source. Ensure that the
water is filled only till the max line. Press the
water tank back into position. Push the
accessory back into the slot till you hear the
click sound indicating that it is locked.
Press the plastic button on top to get a fine mist
spray. Fine mist spray can be used on clothes
whenever doing a crease or thicker material like
cotton and denim.
How to care for your Spray Iron
Wipe thoroughly with a damp cloth or sponge.
Never use abrasives, heavy duty cleansers,
vinegar or scouring pads.
Do not use metal scouring pad since they will
scratch the soleplate.
After the iron is cooled completely, wind the
cord around the storage wrap on the heel of the
iron. Do not wind too tightly as this can damage
the iron.
Suggestions before using the
iron for the first time
1. Certain parts of the iron have been lightly
greased therefore the iron could give off a
little smoke when plugged in for the first
time. This will cease after a short while.
2. Before using the iron for the first time,
remove the plastic protector from the base
(if it has one) clean the base with a soft
cloth.
3. Keep the base very smooth. Do not run it
over metal objects (such as against the
ironing board, buttons, zips, etc.)
4. Pure wool fibres (100% wool) can be
ironed with the appliance in the steam
position .by preference, select a high
steam position and use a dry ironing
cloth.
Selecting the temperature
1. Check the ironing instructions on the
garment to be ironed.
2. If the garment does not have any ironing
instructions but you know the kind of
fabric in question, use the chart below.
3. Fabrics that have some kind of finish
(polishing. wrinkles, contrasts….) can be
ironed at the lowest temperatures.
4. If the fabric contains several kinds of
fibres, always select the temperature
applicable, if an article contains 60%
polyester and 40% cotton, you must
always choose the temperature
corresponding to polyester and without
steam.
5. First classify the articles to be ironed
according to the most suitable ironing
temperature: wool with wool, cotton with
cotton, etc. as the iron heats up as fast
as it cools, start by ironing the articles
requiring the lowest temperature such as
those made of synthetic fibres. Progress
towards those that require the highest
temperatures.
