English
Assembly
This appliance is supplied fully assembled
& only requires parts to be cleaned before
use.
See “Cleaning” for details.
Use
Place the base (5) on a flat, even surface
and connect it to a suitable electrical
supply. Lift the Kettle from the base &
remove the lid (2). Add clean, fresh water
as required, making sure not to exceed the
maximum mark on the windows (3).
Replace the lid, making sure it is seated
correctly and place the Kettle onto the
base. Press the switch (4) down to the l (on)
position. The lamps inside the appliance
will light up & the water will boil. Once the
water is boiled, the Kettle will automatically
turn itself off and the switch (4) will return to
the 0 (off) position. Disconnect the
appliance from the electrical supply.
Note
: Always fully unwind the cord from the
base before using the Kettle
Note:
Surfaces may be hot during use and
during the cool down period
Maintenance
Your Black & Decker tool has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning!
Before performing any
maintenance or cleaning of the tool,
disconnect the appliance from the power
supply. Ventilation slots should be cleaned
occasionally with a clean, dry paint brush.
Cleaning
Disconnect the appliance from the
electrical supply.
From time to time, dependent on the nature
of your water supply, you may need to
clean inside of the kettle. This may be done
in the following manner:
• Half fill the kettle with ordinary tap water
• Add 30ml of white vinegar to the water in
the kettle
• Boil the mixture and allow it to stand for
30 seconds
• Repeat this process two or three times.
Empty, rinse well and use in the normal
way.
Pull the filter (9) from its location & rinse it
under clean, running water. Slide it back in
place, making sure is correctly located
before re-using the Kettle. All other parts
should be cleaned with a damp cloth & be
dried thoroughly using a dry soft cloth
before re-use.
Note:
Do not use abrasives or chemical
cleaners on any part of this appliance.
Note:
Do not immerse the appliance, base,
cord set or plug in liquids
-6-