Overview
1. On/Off switch
2. Handle
3. Blow tube
4. Charging socket
Assembly
Warning!
Before assembly, remove the unit from the
charger.
Connecting the blow tube (fig. 2)
Blow tube must be assembled to the blow clamshell
before use.
• Align the circles (5) on the clamshell (6) and the tube (3).
• Push the tube fi
rmly onto the clamshell until the circles
click into place.
•
For storage the blow tube can be detached from the blow
clamshell by depressing the circles on either side and
gently sliding off the tube.
Use
TO REDUCE RISK OF INJURY:
• Before any use, be sure eve
ryone using this tool reads
and understands all safety instructions and other
information contained in this manual.
• Save these inst
ructions and review frequently prior to use
and in instructing others.
• Do not point tool discharge at self or by standers.
•
Keep long hair and loose clothing away from openings
and moving parts.
WARNING:
When using an electric tool, basic safety
precautions should always be followed to reduce risk of fire,
electric shock, and personal injury, including the
following.
WARNING:
Some dust created by this product contains
chemicals known to the State of California to cause cancer,
bir
th defects or other reproductive harm. Some examples
of these chemicals are:
• compounds in fe
rtilizers
• compounds in insecticides, herbicides and pesticides
• arsenic and chromium from chemically treated timber
T
o reduce your exposure to these chemicals, wear approved
safety equipment such as dust masks that are designed to
filter out microscopic particles.
5
Additional safety instructions for blowers
Warning!
Do not point the tool at persons or animals when it
is switched on.
this tool.
Use a face or dust mask whenever the operations take
place in dusty surroundings.
Do not expose the tool to rain or high humidit
y.
Do not place outlet tubes near eyes or ears when
operating.
Do not cross gravel paths or place the tool on gravel
while the tool is switched on.
Do not place any objects into the openings and moving
parts.
Before removing the blow tube, always switch off the tool,
and allow the tool to run down.
Read the instructions carefully. Be familiar with the
controls and the proper use of the appliance.
Do not allow children or any person unfamiliar with these
instructions to operate the appliance. Local regulations
may restrict the age of the operator.
Never use the appliance while people, especially children,
or pets are nearby.
Remember that the operator will be held responsible for
accidents or hazards occurring to other people or their
property.
Preparation
Do not operate your product barefoot or in open sandals.
To protect your feet and legs, always wear stout shoes or
boots and long trousers - freshly cut grass is damp and
slippery. Rubber or man made footwear will enhance your
Warning!
Only use the tool in the manner it was intended.
4. K
eep on charge when not in use for maximum battery
life.
WARNING:
This product contains chemicals, including
lead, known to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
READ AND UNDERSTAND ALL
INSTRUCTIONS BEFORE USING.
Switching on and off (Fig. 1)
•
To switch the tool on, press the on/off switch
(1) to the right.
•
To switch the tool off, press the on/off switch
to the left.
Hints for optimum use (Fig 4)
• Hold the blow tube approx. 180 mm (7”) above the
ground when operating the tool.
• Use a sweeping motion from side to side. Advance
slowly keeping the accumulated debris/leaves in front
of you (fig. 4).
• A
fter blowing the debris/leaves into a pile, it is easy to
dispose of the pile.
Wear safety glasses or goggles when operating
