Black & Decker CLMA4825L2, Manual

Page: 16 / 152

16
ENGLISH (Original instructions)
Problem Possible solution
Mower runs but cutting
performance is unsatis-
factory, or does not cut
entire lawn.
Has battery been fully charged? Press state of
charge button.
Release bail handle to turn mower off. Remove
safety key and battery pack. Turn mower over
and check:
u
Blade for sharpness - Keep blade sharp.
u
Deck and discharge chute for clogging.
Wheel height adjustment may be set too low
for grass condition. Raise cutting height.
Mower is too hard to
push.
Release bail handle to turn mower off. Remove
safety key and battery pack. Raise cutting
height to reduce deck drag on grass. Check
each wheel for free rotation
Mower is abnormally
noisy and vibrates.
Release bail handle to turn mower off. Remove
safety key and battery pack. Turn mower on
side and check blade to ensure it has not been
bent or damaged. If blade is damaged, replace
with a BLACK+DECKER replacement blade.
If the underside of the deck is damaged, return
mower to a BLACK+DECKER Authorized
service center.
If there is no visible damage to the blade and
the mower still vibrates:
u
Release bail handle to turn mower off.
u
Remove safety key and battery pack.
u
Disassemble entire blade assembly as
described in the “Removing and installing
blade” section.
u
Remove any debris and clean each
piece.
u
Replace each piece as described in the
“Removing and installing blade” section.
If mower still vibrates, return the mower to
an authorized BLACK+DECKER authorized
service center.
Battery charger LEDs
not on.
Check plug connection.
Replace charger.
Mower not picking up
clippings with bag.
Chute clogged. Release bail handle to turn
mower off. Remove safety key and battery
pack. Clear chute of grass clippings.
Raise cutting height of wheels to shorten
length of the cut.
Bag full. Empty bag more often.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials. Please
recycle electrical products and batteries according to local
provisions. Further information is available at
www.2helpU.com
Technical data
CLMA4825L2 H1
Input Voltage V
DC
36V
CLMA4825L2 H1
No-Load Speed min
-1
2900
Weight kg net weight 21.24KG gross 25.95KG
Battery BL2536
Voltage V
DC
36
Capacity Ah 2.5
Type Li-Ion
Charger 90616337-xx
Input Voltage V
AC
230
Output Voltage V
DC
36
Current mA 1300
Approx. charge time min 110
Hand/arm weighted vibration value:
= < 0,5 m/s
2
, uncertainty (K) = 1,5 m/s
2
.
L
PA
(sound preasure) 75 dB(A)
uncertainty (K) = 3.0 dB(A)
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
%
CLMA4825L2 Autosense lawn mower
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN60335-1:2012 + A11:2014 + A13:2017 +
A1:2019 + A14:2019 + A2:2019, EN60335-2-77:2010.
2000/14/EC, Lawn Mower, L < 50cm, Annex VI,
DEKRA Testing and Certification GmbH,
Handwerkstraße 15, 70565 Stuttgart
Location Certification Body,
Dinnendahlstr. 9, 44809 Bochum Germany
Notified Body number: 0158
L
WA
(measured sound power level) 88 dB(A),
Uncertainty (K) = 0.9 dB(A),
L
WA
(guaranteed sound power) 96 dB(A).
These products also comply with directive
2014/30/EU,2011/65/EU.