Black & Decker BPWM16W, Instruction Manual

Page: 22 / 100

Page 23
ENGLISH
SET UP & USE
RINSE & SPIN CYCLE GUIDE
Normal/Eco is the recommended wash cycle to wash up to a full load of normally
soiled cotton or linen clothing. The cycle (Normal/Eco on large load size and
cold water temperature) has a much longer spin time (86 minutes)than other
cycles, which removes more water from your clothes than other cycles, providing
you with energy savings when drying your clothes in your dryer.Hot and warm
water temperatures are the same when using Normal/Eco. If you need a higher
temperature wash, use a different program.
Program
Load Size
Soak
time
(approx.)
Wash
Time
(ap-
prox.)
Rinse
Times
Final
Spin
Time
Total
Time
Default Scope
Normal Large Sm, Med, Lg – 15 min 1 8 min 34 min
Heavy Large Sm, Med, Lg – 15 min 2 7 min 52 min
Delicate Large Sm, Med, Lg – 12 min 1 5 min 35 min
Quick Medium
Sm – 3 min 1 4 min 15 min
Med – 3 min 1 4 min 19 min
Lg – 3 min 1 4 min 22 min
Bulky Large Sm, Med, Lg 15 min 15 min 2 9 min 69 min
Spin Only – – – – – 24 min 26 min
Program
Wash Rinse
Spin
min/times
Load Size
preset
Remain
(min)
1----small
2----medium
3----large
Wash Rinse
min/times
Load Size
preset
Remain
(min) 1----small
2----medium
3----large
Wash Spin
min/times
Load Size
preset
Remain
(min) 1----small
2----medium
3----large
Rinse
Spin
min/times
Load Size
preset
Remain
(min)
1----small
2----medium
3----large
Wash
Rinse
Spin
Step 5: Start the cycle
Press the START/PAUSE button to start the washing cycle. When the
washing cycle begins, the Estimated Time in minutes for the cycle to
complete will show and count down in the digital display. Or, if Delay Start
is set, the display will count down the hours until the cycle begins, and then
change to a minute countdown for the cycle.
CAUTION:
When the washer is running, you should pause the program and wait
for the tub to stop completely before you open the lid.
Control Lock
Press and hold the TEMP and PROGRAM buttons
simultaneously to activate this function. When Control Lock
is activated, the indicator light will turn on. The control panel
buttons will not function except for
POWER and the ability to
deactivate
Control Lock
by pressing and holding the
TEMP
and PROGRAM buttons again.